Palmer RIVER naab - Passive 2-Channel Media DI-Box

Palmer RIVER naab - Passive 2-Channel Media DI-Box

For connecting media devices (e.g., a laptop) to PA systems

Reliably eliminates ground loop hum and interfering signals

Galvanic transformer isolation

Stereo, mono-switchable

Inputs as 2 x 6.3 mm jacks (balanced/unbalanced) 2 x RCA, 1 x mini jack stereo

2 balanced XLR outputs

Optimal impedance matching to avoid sound losses

Passive construction, no power supply required

Solid casing made of aluminium and steel

Incl. rewritable tour label for attachment onto the back of the naab

Engineered in Germany

SKU: AHPNAAB
GTIN: 4049521705298
Category: audio solutions
Manufacturers: Palmer

219.00 CHF

incl. 8,1% VAT ,

RRP: 244.00 CHF

(Save 10.25%, i.e. 25.00 CHF)

pcs.

deliverable
Delivery time: 6 - 7 Workdays info

If you connect a laptop to a sound system, in many cases the sound quality leaves a lot to be desired. It hums and crackles, sometimes there is also a loss of sound in the low and high frequencies. The Palmer naab, a two-channel media DI box, provides a reliable solution for this situation.

Its best in class isolating transformers and the switchable hard or soft ground lifts prevent any humming. The transformers also ensure a perfect level and impedance adjustment. The result is clean sound without any noise.

If necessary, the Palmer naab can be switched from stereo to mono, which is often very useful in practice. The mono sum signal is then available at both XLR outputs at the same time; this way, the naab can also be used as a split box.

On the input side, there is a wide range of connections: 2 x 6.3 mm jack sockets, which can be balanced or unbalanced, as well as 2x RCA and 1x 3.5mm mini jack (stereo). This eliminates the need for adapter cables - which you always forget to take with you anyway! The outputs are professional XLR sockets; their balanced wiring allows even longer cable runs without any noise.

Due to its passive mode of operation, the Palmer naab does not need a power supply; this makes it extremely failure-proof, especially as the robust metal housing can withstand a lot. The Palmer naab is the ace up the sleeve for every lecture traveller, DJ and sound engineer.

Product type	line isolator
Channels	2
Type	passive
Transformer isolated	Yes
Inputs	2
input type	unbalanced
Input connectors	3.5 mm TRS
Input connectors	6.3 mm jack
Input connectors	RCA
Outputs	2
Output type	balanced
Output connectors	XLR
Ground lift switch	Yes
Additional Features	Mono summing switch
Housing	Aluminium continuous casting
Dimension (H/W/D)	140 x 50 x 58 mm
Weight	0,555 kg
Ambient temperature during operation	-20 - 70 °C
Relative Humidity	< 80 %, not condensing
Accessories (included)	Inscription label (tour label)
Accessories (included)	rubber feet

Audio

Max. input level (< 1% THD, 20 Hz)	+ 14 dBu
Max. input level (< 1% THD, 1 kHz)	+ 32 dBu
Frequency response (±0,2dB, relative 1kHz)	5 Hz - 50 kHz kHz
Input impedance (1 kHz)	10 kOhm
Output impedance (1 kHz)	80 Ohm(s)
THD (30 Hz,-10 dBV, unity, unweighted)	< 0,03 %
THD (1 kHz, - 10 dBV, unity, unweighted)	< 0,0008 %
IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)	< 0,002 %
Transformer ratio	3.16 : 1

There are no reviews yet.