Palmer RIVER iller - Passive Line Isolation Box with Combo Input

Palmer RIVER iller - Passive Line Isolation Box with Combo Input

Line isolation for guitar/bass/keyboard; also suitable for HiFis and car stereos

Single channel: Combo input (XLR/jack) and XLR output

Reliably eliminates ground loop hum and interfering signals

Galvanic transformer isolation

Can be used to balance signals

Pure and unaltered sound

Passive operation: simple and failure-proof

Distortion-free up to +6 dBu

Solid casing made of aluminium and steel

Incl. rewritable tour label for attachment onto the back of the iller

Engineered in Germany

SKU: AHPILLER
GTIN: 4049521705328
Category: audio solutions
Manufacturers: Palmer

102.00 CHF

incl. 8,1% VAT , plus

RRP: 113.00 CHF

(Save 9.73%, i.e. 11.00 CHF)

pcs.

deliverable
Delivery time: 6 - 7 Workdays info

The more complex the setup, the higher the chance of ground loops. With the Palmer iller Line Isolation Box, everything is quiet again so you can enjoy your audio without humming and buzzing.

The Palmer iller is an isolation transformer in a robust aluminium and steel housing. It separates the ground potentials of two devices so that equalising currents are prevented and only your sound is transmitted - clean and without interference. The only difference to its sister model wupper is that the Palmer iller is equipped with a combo socket on the input side that can accept both jack and XLR connectors. This eliminates the need for adapter cables.

The Palmer iller was developed for guitar and bass applications; however, due to its high-quality sound characteristics, it is just as suitable for keyboards and hi-fi equipment. The input (XLR/jack) can be balanced or unbalanced and the output (XLR) is balanced. This means that the Palmer iller can also be used to balance unbalanced signals, which allows longer cable runs without affecting the sound. Because of its passive design, the iller requires neither batteries nor phantom power. This makes it extremely failure-proof.

The Palmer iller is a simple, efficient hum killer: you connect it between two devices and the noise is gone. Sometimes it can be that simple!

Product type	line isolator
Channels	1
Type	passive
Transformer isolated	Yes
Inputs	1
input type	balanced/ unbalanced
Input connectors	6.3 mm jack
Input connectors	XLR
Outputs	1
Output type	balanced
Output connectors	XLR
Ground lift switch	Yes
Housing	Aluminium continuous casting
Dimension (H/W/D)	110 x 50 x 50 mm
Weight	0,3 kg
Ambient temperature during operation	-20 - 70 °C
Relative Humidity	< 80 %, not condensing
Accessories (included)	Inscription label (tour label)
Accessories (included)	rubber feet

Audio

Max. input level (< 1% THD, 20 Hz)	+ 10 dBu
Max. input level (< 1% THD, 1 kHz)	+ 32 dBu
Frequency response (±0,2dB, relative 1kHz)	20 Hz - 20 kHz kHz
Input impedance (1 kHz)	17 kOhm
Output impedance (1 kHz)	500 Ohm(s)
THD (30 Hz, +4 dBu, unity, unweighted)	< 0,09 %
THD (1 kHz, +4 dBu, unity, unweighted)	< 0,002 %
IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)	< 0,002 %
Transformer ratio	1 : 1

There are no reviews yet.