Palmer RIVER elde - Passive 2-channel DI box

Palmer RIVER elde - Passive 2-channel DI box

Balancing and impedance matching for guitar/bass/keyboard synthesisers

Two-channel model for stereo signals or two instruments

Eliminates ground loop hum thanks to galvanic transformer isolation

Extremely fail-safe, no power supply required

Thru-out for routing input signals to amplifiers

Pure and unaltered low-noise audio

Handles even high-level inputs without distortion

Switchable 30 dB pad for extremely high input levels (e.g. amplifier output)

Solid casing made of aluminium and steel

Incl. rewritable tour label for attachment onto the back of the elde

Engineered in Germany

SKU: AHPELDE
GTIN: 4049521705335
Category: audio solutions
Manufacturers: Palmer

130.00 CHF

incl. 8,1% VAT , plus

RRP: 144.00 CHF

(Save 9.72%, i.e. 14.00 CHF)

pcs.

deliverable
Delivery time: 6 - 7 Workdays info

Are you looking to pick up the raw signal from a guitar, bass or keyboard without noise and tonal loss, even over long cable runs? That's exactly what the Palmer elde does - simply and reliably. Especially since the elde is a classic passive DI box, and it even has a dual-channel design. This means you can use it for stereo signals as well as for two different instruments.

The inputs are each looped to a THRU Out, allowing the signal to be passed on to the guitar/bass amplifier. For very high level signals, each channel has its own pad switch (-30 dB), so you can also insert the elde between the amplifier output and the loudspeaker. The output signals are balanced and with low impedance, so that they can withstand even longer cable runs without damage. Impedance conversion and balancing is done passively via a transformer, which also provides galvanic isolation. Each channel has its own ground lift switch to eliminate ground loops.

The Palmer elde is a high-quality two-channel DI box that is extremely easy to use. Due to its passive design, it requires neither batteries nor phantom power. This makes it extremely reliable and failure-proof. With its robust aluminium/steel housing, the Palmer elde easily withstands rough everyday use on stage, and with its clean, unaltered sound, it also excels perfectly in the recording studio.

Product type	DI box
Channels	2
Type	passive
Transformer isolated	Yes
Inputs	2
input type	unbalanced
Input connectors	6.3 mm jack
Outputs	2
Output type	balanced
Output connectors	XLR
THRU outputs per channel	1
Input attenuation (Pad)	0 dB / 30 dB
Ground lift switch	Yes
Housing	Aluminium continuous casting
Dimension (H/W/D)	140 x 50 x 128 mm
Weight	0,66 kg
Ambient temperature during operation	-20 - 70 °C
Relative Humidity	< 80 %, not condensing
Accessories (included)	Inscription label (tour label)
Accessories (included)	rubber feet

Audio

Max. input level (< 1% THD, 20 Hz)	+20 dBu
Max. input level (< 1% THD, 1 kHz)	+32 dBu
Input impedance (1 kHz)	38.5 kOhm
Output impedance (1 kHz)	25 - 80 Ohm(s)
THD (30 Hz, +4 dBu, unity, unweighted)	< 0,03 %
THD (1 kHz, +4 dBu, unity, unweighted)	< 0,002 %
IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)	< 0,002 %
Transformer ratio	10 : 1

There are no reviews yet.