REUTLINGER Cable Glider Type 80SVIII-RING bk

Cable glider, up to 240 kg work load

For rope diameters 6.0 to 8.0 mm

6-ball mechanism

With eyering DIN 582 M20 black zinc plated C15E

Please note: Cable gliders must not be used for dynamic loads. Always use at least 2 cable gliders for every suspended object.

M20 thread

Made in Germany

BG certified

TÜV/GS certified

For further information about this product, please refer to the Data Sheet under "Downloads"

Numéro d'article: ST58010557
Code barre – EAN: 4026397596021
catégorie: appareils à attacher
Fabricants: Reutlinger

118.00 CHF

inclus 8,1% USt. , plus

PVR: 139.00 CHF

(Vous économisez 15.11%, donc 21.00 CHF)

disponible
Temps de livraison: 6 - 7 jours ouvrables info

Certified cable holderCable holders can be used for easily suspending static workloads on attachment ropes. No tools are required. The load can be hung at any position and height and easily be re-positioned.The REUTLINGER cable holders are the only system certified by two independant certification bodies. This cable holder boasts of a TUV certificate and a German BGV C1 certificate and can be used in entertainment technology.TÜV GS and BGV C1 - double-tested and double-certifiedREUTLINGER® grippers type 50 SV III, type 66 SV III and type 80 SV III are not only certified as safe (GS) by the German TÜV, they have also been licensed for use within the scope of standard DGUV Regulation 17 (BGV C1).The DGUV Test certificate authorises these grippers for use within the scope of the accident prevention regulations issued by the German employers' liability insurance associations in respect of staging and production facilities.The test seal of the DGUV is conferred only after extensive examining of all load applications. Further testing simulated most anticipated mis-applications.REUTLINGER® gripper ranges 50, 66 and 80 are the only load-bearing devices certified by the DGUV for use in mobile production facilities.

Cable glider, up to 240 kg work load

For rope diameters 6.0 to 8.0 mm
6-ball mechanism
With eyering DIN 582 M20 black zinc plated C15E
Please note: Cable gliders must not be used for dynamic loads. Always use at least 2 cable gliders for every suspended object.
M20 thread
Made in Germany
BG certified
TÜV/GS certified
For further information about this product, please refer to the Data Sheet under "Downloads"

For rope diameter:	6 mm - 8 mm
Work load:	8 mm: 240 kg 6 mm: 135 kg
Color:	Black
Ring diameter:	Outside: 72 mm Inside: 40 mm
Thread:	M20 thread x 30 mm
Dimensions:	Length: 15,50 cm Diameter: Ø 4 cm
Weight:	900 g

For rope diameter:	6 mm - 8 mm
Work load:	6 mm: 135 kg 8 mm: 240 kg
Color:	Black
Ring diameter:	Outside: 72 mm Inside: 40 mm
Thread:	M20 thread x 30 mm
Dimensions:	Length: 15,50 cm Diameter: Ø 4 cm
Weight:	900 g

Il n'y a pas encore d'évaluation.