Miete: QSC PL380, 100.00 CHF

Beschreibung
Bewertungen

QSC PL380

Features
PowerLight switch-mode power supply for highest efficiency and improved audio performance
Flow-through air path and solid aluminum heat sinks for maximum cooling
DataPort supports remote network control and monitoring via Q-SYS
Detented gain controls with 1-dB steps for precise calibration
Removable knobs with lock-out security plate to prevent unauthorized tampering
User defeatable clip limiters and selectable low-frequency filter per channel (3 Hz, 30 Hz, or 50 Hz)
Three selectable gain structures (26 dB, 32 dB, or 1.2 V)
Front and rear panel LEDs indicate status of switch settings at a glance
Parallel XLR/M and XLR/F connectors for simple loop-through connectivity
Neutrik Speakon® and "Touch-Proof" binding post outputs
Neutrik Powercon® power cable remains secure on the road
3 year warranty, plus optional 3 year extended service contract
Linear Class H output circuit offer double the typical efficiency of Class B, reducing AC current consumption and cooling requirements

SPECIFICATIONS	PL380
	OUTPUT POWER PER CHANNEL, STERO MODE, both channels driven
8Ω EIA 1 kHz 1% THD	1500 W
4Ω EIA 1 kHz 1% THD	2500 W
2Ω EIA 1 kHz 1% THD	4000 W*
	OUTPUT POWER, BRIDGE MONO MODE
8Ω EIA 1 kHz 1% THD	5000 W
4Ω EIA 1 kHz 1% THD	8000 W*
Typical Distortion (20 Hz–3 kHz, 3 dB below clip, or 20 Hz–5 kHz, 10 dB below clip, or 20 Hz–20 kHz, 20 dB below clip) 8 ohms 4 ohms 2 ohms	0.01-0.03% 0.03-0.06% 0.1%
Maximum Distortion (20 Hz–20 kHz, 1 dB below rated power) 4 to 8 ohms	0.2%
Frequency Response (8 ohms)	20 Hz–20 kHz, ±0.2 dB
Noise (20 Hz–20 kHz, 32 dB Gain)	-104 dB
Dynamic Headroom (4 ohms)	2 dB
Damping Factor (8 ohms)	200
Output Circuitry	Class D
Input Sensitivity 26 dB Setting 32 dB Setting	5.27V 2.67V
Maximum Gain (1.2V setting)	39.1 dB
Maximum Input Level 1.2V setting 32 dBu setting 26 dBu setting	10 V (+22 dBu) 22 V (+29 dBu) 25 V (+30 dBu)
AC Power Requirements ** 120V 50/60 Hz 230V 50 Hz	18 A 11 A
Cordset 120V 50/60 Hz 230V 50 Hz	NEMA L5-30P CEE 7/7 16A
Chassis Power Connector All Voltages	32A PowerCon
Input Impedance	> 10 kΩ balanced, or unbalanced
Cooling	Variable-speed fan, rear-to-front air flow
Connectors (each channel)	Input: XLR Male, XLR Female and 3-pin detachable terminal blocks (1 each per channel) Output: Neutrik Speakon® (ch 1 wired to both channels) and 5-way binding posts DataPort: HD-15, input signal in parallel with XLR input connectors
Front Controls	AC power switch Gain controls, 21 detents, 1 dB steps (each channel)
Front Indicators (LED color)	Power (Blue) Bridged (Yellow) Parallel (Orange) Clip/Prot (Red × 2) Level -10 (Orange × 2) Level -20 (Green × 2) Signal -35 (Green × 2)
Rear Controls (with LED indicators)	Input Mode: Bridge (Yellow), Stereo (Green), or Parallel (Orange) Gain / Sensitivity: 26 dB (Orange), 32 dB (Green), or 1.2V (Yellow) High Pass (each channel): 3 Hz (Off), 30 Hz (Yellow), or 50 Hz (Orange) Clip Limiter (each channel): Off, on (Yellow)
Amplifier and Load Protection	Short circuit, open circuit, thermal, RF protection. On/off muting, DC fault shutdown, active inrush limiting
Product Dimensions (H×W×D)	89 (2 RU) × 483 × 397 mm 3.5 (2 RU) × 19 × 15.63 in
Carton Dimensions (H×W×D)	610 × 560 × 178 mm 24 × 22 × 7 in
Net Weight	11 kg / 24 lb
Shipping Weight	15.0 kg / 33 lb
Agency Approvals	UL, CE, RoHS/WEEE compliant, FCC Class B (conducted and radiated emissions)

Hast du Fragen zum Produkt oder zur Miete? Melde dich ungeniert bei uns

Es gibt noch keine Bewertungen.

Miete: QSC PL380

Features