OnTruss EventBoard S50 BASIC (2 pieces)

OnTruss EventBoard. One system. Many possibilities.

EventBoard fits all 2-point, 3-point and 4-point trusses. It is compatible with all common manufacturers.

EventBoard supports every bracing. The course of the cross bracing does not matter.

EventBoard works on trusses with and without end plates.

One system for different applications (counter, table, seating furniture, panelling)

EventBoard S050 is a fitting element. It closes a 50cm gap, if your setup can't be done in 1m sections.

Low transport and storage volume

Flexibly expandable

Free design (with only a few panel types)

No protruding parts

OnTruss TrussClips can be mounted without tools via 90° turn

Marking system for quick mounting of the TrussClips

High durability

Design flexibility for the truss subbase (e.g. easy mounting of EventBoard S100 on truss divisions of 50cm + 29cm + 21cm)

Additional rail for extensions available (e.g. FrontCover)

EventBoard Basic in straight design

Surface / Edges: phenol resin / lasur

Suitable for pipe distance: 239mm ... 240mm

Note for EventBoard Basic: Due to the coating process, the phenolic resin surface may be subject to colour variations and minor blemishes

Easy to assemble

Suitable for outdoor use

2 pieces per set

Made in Germany

321.00 CHF

incl. 8,1% VAT ,

RRP: 377.00 CHF

(Save 14.85%, i.e. 56.00 CHF)

OnTruss EventBoard. One system. Many possibilities.

EventBoard fits all 2-point, 3-point and 4-point trusses. It is compatible with all common manufacturers.
EventBoard supports every bracing. The course of the cross bracing does not matter.
EventBoard works on trusses with and without end plates.
One system for different applications (counter, table, seating furniture, panelling)
EventBoard S050 is a fitting element. It closes a 50cm gap, if your setup can't be done in 1m sections.
Low transport and storage volume
Flexibly expandable
Free design (with only a few panel types)
No protruding parts
OnTruss TrussClips can be mounted without tools via 90° turn
Marking system for quick mounting of the TrussClips
High durability
Design flexibility for the truss subbase (e.g. easy mounting of EventBoard S100 on truss divisions of 50cm + 29cm + 21cm)
Additional rail for extensions available (e.g. FrontCover)
EventBoard Basic in straight design
Surface / Edges: phenol resin / lasur
Suitable for pipe distance: 239mm ... 240mm
Note for EventBoard Basic: Due to the coating process, the phenolic resin surface may be subject to colour variations and minor blemishes
Easy to assemble
Suitable for outdoor use
2 pieces per set
Made in Germany