PSSO QCA-10000 4-channel SMPS amplifier

Item number: ST10451697

Category: digital amplifier


1'669.00 CHF

including 7,7% VAT.,

Recommended retail price: 2'089.00 CHF
available

Shipping time: 6 - 7 workdays



Description



PA amplifier with SMPS, 4 x 2150 W / 2 ohms, 4 x 2100 W / 4 ohms

  • 4-channel PA amplifier with class I circuitry
  • 4 x 2100 W/4 ohms
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 4 level controls for precise level adjustment
  • Input sensitivity adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
  • Neutrik Speakon outputs

Shipping weight: 16.00 Kg
Product weight: 15.80 Kg

Technical specifications

Power supply: 230 V AC, 50 Hz
Power consumption: 1150 W (1/8 power)
Power output (RMS):
2 ohms 4 x 2500 W
4 ohms 4 x 2100 W
8 ohms 4 x 1300 W
4 ohms bridged 2 x 5000 W
8 ohms bridged 2 x 4200 W
Frequency range: 20-20000 Hz
Signal-to-Noise ratio: >80 dB
Total harmonic distortion: <0.05 %
Damping factor: >800
Slew rate: >10 V/µsec
Crosstalk: >65 dB
Input sensitivity: 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable
Voltage gain: 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V)
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: 4 x XLR
Output connectors: 4 x Speaker, 4 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling: 2 temperature-controlled fans, front-to-rear
Controls: Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators: Protect, clip, signal (per channel)
Construction: Steel chassis, aluminum front panel
Dimensions: 483 x 445 x 89 mm
Rack installation with 2 U
Weight: 15,7 kg

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:


Accessories
OMNITRONIC Speaker cable Speaker 2x1.5 10m bkOMNITRONIC Speaker cable Speaker 2x1.5 10m bk
Product available: 02.12.2018
Pre-order is possible
OMNITRONIC Rack bracket for amplifier, back, 2UOMNITRONIC Rack bracket for amplifier, back, 2U
on demand
OMNITRONIC XLR cable 3pin 3m bkOMNITRONIC XLR cable 3pin 3m bk
Enough in stock
PSSO Speaker cable Speakon 2x1.5 10m bkPSSO Speaker cable Speakon 2x1.5 10m bk
Product available: 02.09.2018
Pre-order is possible
PSSO XLR cable 3pin 3m bkPSSO XLR cable 3pin 3m bk
on demand
ROADINGER Amplifier rack PR-2ST, 4U, 57cm deepROADINGER Amplifier rack PR-2ST, 4U, 57cm deep
available
ROADINGER Amplifier rack SP-2, 4U, shock-proofROADINGER Amplifier rack SP-2, 4U, shock-proof
available
Alternative products
PSSO QCA-6400 4-channel SMPS amplifierPSSO QCA-6400 4-channel SMPS amplifier
available